[1] |
傅旭峰,司顺勇,马武明,等. 超临界锅炉等离子无油点火的燃烧调整 [J]. 锅炉技术,2016,47(2): 66-67.
FU X F, SI S Y, MA W M,et al. Combustion and justment of supercritical boiler under oil-less plasma ignition mode [J]. Boiler Technology,2016,47(2): 66-67. |
[2] |
周俊虎,聂欣,周志军,等. 无油点火燃烧器的数值试验研究 [J]. 中国电机工程学报,2004,24(9): 243-247.
ZHOU J H, NIE X, ZHOU Z J,et al. Numerical simul aition of oil-free ignition combustor [J]. Proceedings of the CSEE,2004,24(9): 243-247. |
[3] |
刘圣勇,张百良,刘志刚,等. 电站锅炉天然气点火装置的设计与研究 [J]. 热能动力工程,2002,17(98): 180-182.
LIU S Y, ZHANG B L, LIU Z G,et al. Design and study of the natural gas ignition device of a utility boiler [J]. Journal of Engineering for Thermal Energy and Power,2002,17(98): 180-182. |
[4] |
金非,孙文华,赵洪斌. 微油点火技术在直吹式制粉系统锅炉上的应用 [J]. 中国电力,2009,42(9): 66-69.
JIN F, SUN W H, ZHAO H B,et al. Application of tiny-oil ignition technology for direct-fired system boiler [J]. Electric Power,2009,42(9): 66-69. |
[5] |
黄文锋. 微油点火和超低负荷稳燃技术的应用 [J]. 发电设备,2008(4): 299-302.
HUANG W F. Application of tiny-oil ignition and combustion stabilization technology for ultra low load operations [J]. Power Equipment,2008(4): 299-302. |
[6] |
吴阿峰,李明伟,黄涛,等. 烟气脱硝技术及其技术经济分析 [J]. 中国电力,2006(11): 71-75.
WU A F, LI M W, HUANG T,et al. Several practical flue gas de-nox technologies and techno-economic analysis [J]. Electric Power,2006(11): 71-757. |
[7] |
吴阿峰,潘灏,谭灿燊. 1 000 MW超超临界燃煤锅炉引风机配置的技术经济分析 [J]. 发电设备,2009(2): 136-139.
WU A F, PAN H, TAN C S. Configuration of induced fan for coal-fired boilers of 1 000 MW ultra supercritical power plants [J]. Power Equipment,2009(2): 136-139. |
[8] |
刘国伟,董芃,别如山. 煤粉高温富氧无油点火实验和数值模拟研究 [J]. 动力工程学报,2013,33(11): 837-839.
LIU G W, DONG P, BIE R S. Experimental study and numerical simulation on high-temperature oxygen-enriched oil-free pulverized coal ignition [J]. Journal of Chinese Society of Power Engineering,2013,33(11): 837-839. |
[9] |
邹罗明. 超超临界机组邻炉蒸汽加热系统优化研究 [J]. 南方能源建设,2016,3(2): 127-130.
ZOU L M. Optimization research on adjacent boiler heating system of ultra supercritical unit [J]. Southern Energy Construction,2016,3(2): 127-130. |