火力发电厂四大管道偏差分析

王旭东; 王斌; 王旭东; 王斌

doi:10.16516/j.gedi.issn2095-8676.2022.S1.008

[1]	陆江云.火力发电厂四大管道材料的选择及配管 [J].红水河， 2011， 30(5): 78-80+114.DOI: 10.3969/j.issn.1001-408X.2011.05.020. LUJ Y.Material selection and piping of four pipelines in thermal power plant [J].Hongshui River， 2011， 30(5): 78-80+114.DOI: 10.3969/j.issn.1001-408X.2011.05.020.
[2]	郑赟.F级改进型燃机联合循环电站主蒸汽系统设计优化 [J].南方能源建设， 2015， 2(1): 46-50.DOI: 10.16516/j.gedi.issn2095-8676.2015.01.009. ZHENGY.Pressure drop research and design optimization of main steam system in advanced F class gas-steam combined cycle power plants [J].Southern Energy Construction， 2015， 2(1): 46-50.DOI: 10.16516/j.gedi.issn2095-8676.2015.01.009.
[3]	温志华，董雷，付金良.再热蒸汽热段管道支吊架的优化调整 [J].华电技术， 2009， 31(4): 44-46+66.DOI: 10.3969/j.issn.1674-1951.2009.04.014. WENZ H， DONGL， FUJ L.Optimal adjustment of supports and hangers of hot reheat steam pipe [J].Huadian Technology， 2009， 31(4): 44-46+66.DOI: 10.3969/j.issn.1674-1951.2009.04.014.
[4]	安慧，安付立，韩光辉，等.发电机组管道支吊架常见问题分析及处理 [J].热力发电， 2012， 41(11): 80-82+73.DOI: 10.3969/j.issn.1002-3364.2012.11.080. ANH， ANF L， HANG H, et al.Common problems and case study for pipe supports and hangers in power generating units [J].Thermal Power Generation, 2012, 41(11): 80-82+73.DOI: 10.3969/j.issn.1002-3364.2012.11.080.
[5]	王少宁.火电厂大机组四大管道设计计算中的若干重要问题 [J].现代电力, 2002, 19(3): 8-14.DOI: 10.3969/j.issn.1007-2322.2002.03.002. WANGS N.Important factors in the HTHP pipe design and calculation in power plant [J].Modern Electric Power, 2002, 19(3): 8-14.DOI: 10.3969/j.issn.1007-2322.2002.03.002.
[6]	李靖.压力管道应力分析 [J].中国石油和化工标准与质量, 2018, 38(10): 151-152.DOI: 10.3969/j.issn.1673-4076.2018.10.072. LIJ.Stress analysis of pressure pipeline [J].China Petroleum and Chemical Standard and Quality, 2018, 38(10): 151-152.DOI: 10.3969/j.issn.1673-4076.2018.10.072.
[7]	廖一, 孙中元, 唐璐, 等.某在建超临界机组四大管道支吊架检查 [J].华北电力技术, 2011(7): 26-28+48.DOI: 10.3969/j.issn.1003-9171.2011.07.007. LIAOY, SUNZ Y, TANGL, et al.Maintenance of HTHP piping support and hanger in super critical unit under construction [J].North China Electric Power, 2011(7): 26-28+48.DOI: 10.3969/j.issn.1003-9171.2011.07.007.
[8]	彭兴虎.350 MW机组主厂房布置优化分析 [J].南方能源建设, 2015, 2(1): 55-61.DOI: 10.16516/j.gedi.issn2095-8676.2015.01.011. PENGX H.Optimizing and analysis for main power building arrangement of power plant with 350 MW units [J].Southern Energy Construction, 2015, 2(1): 55-61.DOI: 10.16516/j.gedi.issn2095-8676.2015.01.011.
[9]	能源部西北电力设计院.火力发电厂汽水管道支吊架设计手册—限位装置 [Z].西安: 能源部西北电力设计院, 1993. Northwest Power Design Institute, Department of Energy.Thermal power plant steam pipe support hanger design manual-limit device [Z].Xi'an: Northwest Electric Power Design Institute, Ministry of Energy, 1993
[10]	田晓, 肖国华, 李益民, 等.超超临界机组四大管道工厂化配制过程的常见质量问题及控制 [J].电力建设, 2011, 32(12): 100-104.DOI: 10.3969/j.issn.1000-7229.2011.12.023. TIANX, XIAOG H, LIY M, et al.Common quality problems and control of factory preparation for four major pipes in ultra supercritical thermal power units [J].Electric Power Construction, 2011, 32(12): 100-104.DOI: 10.3969/j.issn.1000-7229.2011.12.023.
[11]	鲁皓.弯头壁厚超标对管道设计的影响分析 [J].湖北电力, 2011, 35(3): 65-67.DOI: 10.3969/j.issn.1006-3986.2011.03.029. LUH.The influence analysis of the over-thick elbow wall on pipe design [J].Hubei Electric Power, 2011, 35(3): 65-67.DOI: 10.3969/j.issn.1006-3986.2011.03.029.
[12]	李航, 席琛.核电机组常规岛主蒸汽管道汽锤计算工况讨论及应用 [J].南方能源建设, 2016, 3(增刊1): 51-54.DOI: 10.16516/j.gedi.issn2095-8676.2016.S1.012. LIH, XIC.Different conditions analysis on steam hammer calculation of main steam system in nuclear power plants conventional island [J].Southern Energy Construction, 2016, 3(Supp.1): 51-54.DOI: 10.16516/j.gedi.issn2095-8676.2016.S1.012.
[13]	田成川, 闵玲春, 徐云启.某电厂350 MW机组再热蒸汽管道下沉治理 [J].东北电力技术, 2011, 32(8): 30-32.DOI: 10.3969/j.issn.1004-7913.2011.08.010. TIANC C, MINL C, XUY Q.Treatment of reheater steam pipe subsidence for 350 MW units [J].Northeast Electric Power Technology, 2011, 32(8): 30-32.DOI: 10.3969/j.issn.1004-7913.2011.08.010.
[14]	郭延军.火力发电厂在役管道支吊架失效分析 [J].热力发电, 2008, 37(2): 84-86.DOI: 10.3969/j.issn.1002-3364.2008.02.022. GUOY J.Failure analysis of pipe supports and hangers in service of thermal power plants [J].Thermal Power Generation, 2008, 37(2): 84-86.DOI: 10.3969/j.issn.1002-3364.2008.02.022.
[15]	侯世勇, 阎风奎, 郑旭升, 等.600 MW机组热段管道支吊架变形原因分析及处理 [J].内蒙古电力技术, 2009, 27(6): 59-60.DOI: 10.3969/j.issn.1008-6218.2009.06.022. HOUS Y, YANF K, ZHENGX S, et al.Cause analysis and treatment of 600 MW units reheat pipe hanger curving [J].Inner Mongolia Electric Power, 2009, 27(6)： 59-60.DOI: 10.3969/j.issn.1008-6218.2009.06.022.
[16]	张抒明, 杜建英.大港发电厂3号机组管道支吊架检查与调整 [J].电力安全技术, 2003, 5(12): 39-40.DOI: 10.3969/j.issn.1008-6226.2003.12.024. ZHANGS M, DUJ Y.Checking and adjusting of piping support in Dagang power plant #3 unit [J].Electric Safety Technology, 2003, 5(12): 39-40.DOI: 10.3969/j.issn.1008-6226.2003.12.024.