[1] |
黎林村. 热电厂采暖供热方案优化研究 [J]. 区域供热,2016(5):71-74+95.
LIL C . Study on optimization of heating schemes in thermal power plants [J]. District Heating,2016(5):71-74+95. |
[2] |
李辉,杨立辉. 工业及采暖热负荷同时需求的350 MW超临界供热机组装机方案研究 [J]. 能源工程,2014(4):67-70.
LIH,YANGL H . Study on installing project of 350 MW supercritical unit based on industrial and heating load demand [J]. Energy Engineering,2014(4):67-70. |
[3] |
中华人民共和国住房和城乡建设部. 小型火力发电厂设计规范:GB 50049—2011 [S]. 北京:中国计划出版社,2011.
Ministry of Housing and Urban-Rural Development of the People’s Republic of China. Code for design of small fossil fired power plant:GB 50049—2011 [S]. Beijing:China Planning Press,2011. |
[4] |
王东雷,张鹏,霍沛强. 采用再热温度630 ℃的1 000 MW新一代超超临界二次再热机组可行性研究 [J]. 南方能源建设,2018,5(3):33-41.
WANGD L. ZHANG P,HUO P Q. Feasibility study on 1 000 MW new generation ultra-supercritical unit with double re-heating cycles at 630 ℃ [J]. Southern Energy Construction,2018,5(3):33-41. |
[5] |
李冰天. 1 000 MW超超临界EC-BEST二次再热机组经济性分析 [J].热能动力工程,2018,33(11):36-41+63.
LIB T. Economic analysis of 1000 MW ultra supercritical EC-BEST secondary reheat unit [J]. Journal of Engineering for Thermal Energy and Power,2018,33(11):36-41+63. |
[6] |
杨洋. 直接空冷15 MW给水泵汽轮机热力设计 [J]. 电站系统工程,2018,34(4):36-38.
YANGY. Design of 15 MW feedwater pump for direct air-cooling unit [J]. Power System Engineering,2018,34(4):36-38. |
[7] |
高展羽,黄峭,王建伟,等. 回热驱动式背压机设计难点探讨 [J]. 东方电气评论,2020,34(4):38-42.
GAOZ Y,HUANGX,WANGJ W,et al. Discussion on the starting operation scheme of regenerative drive type steam turbine [J]. Dongfang Electric Review,2020,34(4):38-42. |
[8] |
赵维印. 调速技术与设备节能改造 [J]. 设备管理与维修,2016(1):106-109.
ZHAOW Y. Speed control technology and equipment energy saving transformation [J]. Plant Maintenance Engineering,2016(1):106-109. |
[9] |
于凤新. 一种新型双背压汽轮机供热系统设计 [J]. 电力勘测设计,2020(9):19-23.
YUF X. Design of heating supply system in a new dual back-pressure steam turbine [J]. Electric Power Survey & Design,2020(9):19-23. |
[10] |
崔利,段远光,曹志刚,等. 背压式汽动引风机控制的优化设计 [J]. 热力发电,2014,43(6):119-123.
CUIL. DUAN Y G. CAO Z G,et al. Design optimization for control strategy of a backpressure steam-driven induced draft fan [J]. Thermal Power Generation,2014,43(6):119-123. |