[1] |
范少涛, 张力, 王立鹤, 等. 海上升压站的抗震性能分析 [J]. 南方能源建设, 2019, 6(4): 101-105. DOI: 10.16516/j.gedi.issn2095-8676.2019.04.016.
FAN S T, ZHANG L, WANG L H, et al. Seismic performance analysis of offshore substation [J]. Southern energy construction, 2019, 6(4): 101-105. DOI: 10.16516/j.gedi.issn2095-8676.2019.04.016. |
[2] |
张伟, 张坤, 姜贞强, 等. 基于多尺度有限元的海上升压站脚靴式桩套筒连接结构分析研究 [J]. 海洋工程, 2022, 40(2): 55-66. DOI: 10.16483/j.issn.1005-9865.2022.02.006.
ZHANG W, ZHANG K, JIANG Z Q, et al. Research on the pile-sleeve structure of boot-type offshore substation based on multi-scale finite element method [J]. The ocean engineering, 2022, 40(2): 55-66. DOI: 10.16483/j.issn.1005-9865.2022.02.006. |
[3] |
孙震洲, 金伟良, 方滔, 等. 典型海上升压站地震储备承载系数研究 [J]. 海洋工程, 2019, 37(3): 95-101,142. DOI: 10.16483/j.issn.1005-9865.2019.03.011.
SUN Z Z, JIN W L, FANG T, et al. On the seismic reserve capacity factor of typical offshore substation [J]. The ocean engineering, 2019, 37(3): 95-101,142. DOI: 10.16483/j.issn.1005-9865.2019.03.011. |
[4] |
孙震洲, 金伟良, 方滔, 等. 海上升压站在靠船工况下振动舒适性研究 [J]. 海洋工程, 2019, 37(5): 148-155. DOI: 10.16483/j.issn.1005-9865.2019.05.017.
SUN Z Z, JIN W L, FANG T, et al. On the vibration comfortableness of offshore substation under ship impact conditions [J]. The ocean engineering, 2019, 37(5): 148-155. DOI: 10.16483/j.issn.1005-9865.2019.05.017. |
[5] |
杨建军, 俞华锋, 赵生校, 等. 海上风电场升压变电站设计基本要求的研究 [J]. 中国电机工程学报, 2016, 36(14): 3781-3788. DOI: 10.13334/j.0258-8013.pcsee.152761.
YANG J J, YU H F, ZHAO S X, et al. Research on basic requirements of offshore substation design [J]. Proceedings of the CSEE, 2016, 36(14): 3781-3788. DOI: 10.13334/j.0258-8013.pcsee.152761. |
[6] |
钱孟祥, 武韦韦. 海洋平台上部组块节点加强板数值模拟 [J]. 中国造船, 2009, 50(增刊1): 325-332.
QIAN M X, WU W W. The numerical simulation of offshore platform topside stifferner [J]. Shipbuilding of China, 2009, 50(Suppl. 1): 325-332. |
[7] |
任灏, 方辉, 魏鑫泽. 导管架船撞损伤与剩余强度的结构有限元模拟与评估方法 [J]. 南方能源建设, 2021, 8(3): 26-33. DOI: 10.16516/j.gedi.issn2095-8676.2021.03.004.
REN H, FANG H, WEI X Z. Structural finite element simulation and evaluation method for ship collision damage and residual strength of the jacket [J]. Southern energy construction, 2021, 8(3): 26-33. DOI: 10.16516/j.gedi.issn2095-8676.2021.03.004. |
[8] |
BAO Q H, FENG H. Finite element simplified fatigue analysis method for a non-tubular joint of an offshore jacket platform [J]. Journal of marine science and application, 2011, 10(3): 321-324. DOI: 10.1007/s11804-011-1075-0. |
[9] |
SAINI D S, KARMAKAR D, RAY-CHAUDHURI S. A review of stress concentration factors in tubular and non-tubular joints for design of offshore installations [J]. Journal of ocean engineering and science, 2016, 1(3): 186-202. DOI: 10.1016/j.joes.2016.06.006. |
[10] |
HOSSEINI S A, ZEINODDINI M, DARYAN A S, et al. Model fire tests on a beam-to-leg connection in an offshore platform topside [J]. Fire and materials, 2014, 38(5): 529-549. DOI: 10.1002/fam.2195. |
[11] |
井司南. 直接焊接K型、KK型圆钢管节点静力性能的有限元分析 [D]. 哈尔滨: 哈尔滨工业大学, 2009. DOI: 10.7666/d.D270178.
JIN S N. Finite element analysis on static behavior of directly welded K-type and KK-type CHS-joints [D]. Harbin: Harbin Institute of Technology, 2009. DOI: 10.7666/d.D270178. |
[12] |
CHEN K M, HUANG H H, WU Q X, et al. Experimental and finite element analysis research on the fatigue performance of CHS K-joints [J]. Engineering structures, 2019, 197: 109365. DOI: 10.1016/j.engstruct.2019.109365. |
[13] |
国家经济贸易委员会. 海上固定平台规划、设计和建造的推荐作法——荷载抗力系数设计法(增补1): SY/T 10009—2002 [S]. 北京: 石油工业出版社, 2002.
State Economic and Trade Commission. Supplement 1 to recommended practice for planning, designing and constructing fixed offshore platform: load and resistance factor design: SY/T 10009—2002 [S]. Beijing: Petroleum Industry Press, 2002. |
[14] |
中华人民共和国住房和城乡建设部. 钢结构设计标准: GB 50017—2017 [S]. 北京: 中国建筑工业出版社, 2018.
Ministry of Housing and Urban-Rural Development of the People's Republic of China. Standard for design of steel structures: GB 50017—2017 [S]. Beijing: China Architecture & Building Press, 2018. |
[15] |
YOUNG W C, BUDYNAS R G. Roark's formulas for stress and strain (7th ed. ) [M]. New York: McGraw-Hill, 2002. |
[16] |
LOUCA L A, ALI R M M. Improving the ductile behaviour of offshore topside structures under extreme loads [J]. Engineering structures, 2008, 30(2): 506-521. DOI: 10.1016/j.engstruct.2007.04.020. |
[17] |
BLODGETT O W. Design of welded structures [M]. Cleveland: James F. Lincoln Arc Welding Foundation, 1966. |
[18] |
范云生, 廖君, 洪波. 海上升压站上部组块节点加劲形式数值分析 [J]. 中国水运, 2021, 21(4): 54-56.
FAN Y S, LIAO J, HONG B. Numerical analysis of offshore platform topside stiffener [J]. China water transport, 2021, 21(4): 54-56. |
[19] |
AISC. Specification for structural steel buildings: ANSI/AISC 360-16 [S]. Chicago: American Institute of Steel Construction, 2016. |
[20] |
Det Norske Veritas. Buckling strength analysis: classification notes No. 30.1 [S]. Høvik: Det Norske Veritas, 1992. |